General Electric Series M contactors:

• Terminal numbering in accordance with EN 50012
• 3-pole: 2,2-5,5 kW Ч 380/415 V Ч AC3, 6-12 ј Ч AC3
• 4-pole: 20 ј AC1
• Control circuit: alternating current up to 600V, direct current up to 440V
• Versions: Ring terminal and printed circuit terminals
• Facility to mount instant and timed auxiliary contact blocks and voltage suppressor block
• Degree of protection IP20 (EN 60529)
• Maximum number of auxiliary contacts to be added: 6

PDF M series datasheets:

Ordering numbers

Dimensions

Datasheets

PDF catalogs:

Broshure

Ordering numbers

Dimensions

Datasheets

A new contactor line Efficor main features:

• Most reliable technology. Best electrical endurance. Widest temperature operation. Reduced flammability risk and lower toxicity. Lowest noise production: 32dBA. Compliant with International standards for plastic parts. Only one frame covering 9 up to 40A series. Three different depths
• High installation benefits
• Outstanding ran

General Electric CL series features:

• Three and four pole contactors 9 to 105A (AC3); 25 to 140A (AC1)
• Fixing by clipping onto 35mm DIN rail EN 50022-35 or by screws
• Terminal numbering in accordance with EN 50005 and EN 50012
• Screws protected against accidental contact in accordance with VDE 0106 T.100, VBG4.
• Three coil terminals
• Mounting possibilities: front/side instantaneous auxiliary contact blocks; timed auxiliary contact blocks; mechanical latch; transient suppressor block and interface modules

PDF CL series:

Ordering numbers

Dimensions

Datasheets

General Electric CK series main features:

• Cover a greater range with with less references, with only 4 coils the new electronic module covers a range from 24V -30% up to 500V +10% (AC 50/60Hz and DC)
• The 4 new coils cover the same range that was previously done with 20.
• Noise reduction even in hard environments with dust and corrosion
• Transient voltage suppressor built-in
• Conversion kit for installed CK base with electronic module
• Application up to 3000m without derating
• Wider temperature range operation: -40? to +70?C
• Better performance in high vibration application; wind, marine, transportation

PDF CK series:

Ordering numbers

Dimensions

Datasheets

PDF catalogs:

Ordering numbers

УCSCNФ contactors incorporate a front block with three early-make auxiliary contacts together with 6 quick discharge resistors (two per phase) through which the capacitors are switched to the network, reducing the current peak. Once the resistors have damped the current peak, the main contacts short-circuit the resistors, carrying the uninterrupted current. A few miliseconds later the early-make auxiliary contact closes to guarantee that all current flows through the main contacts.

PDF catalogs 390.R:

Datasheet

AC and DC control using a bridge rectifier, designed to meet the most recent stringent requirements in terms of reliability, service life and performance.

Main characteristics:

• Sliding contact holder, set on self-centering and self-lubricating bronze bushings
• Minitubes made of high-strength, high electrical resistance material
• Individual auxiliary contacts